Elegance 18K White Gold Emerald Cut Lab Diamond Drop Earrings

Asscher Stud Above an Emerald Cut Drop, in Solid White Gold

These emerald cut lab diamond drop earrings are built as a two-stone column on each ear: a square asscher cut diamond sits at the lobe as a stud, and a larger emerald cut diamond hangs articulated below it. The cuts share the same step-cut family, so the pair reads as one continuous, vintage-inflected line of light rather than two separate stones.

Product type

Two-stone diamond drop earrings, pair

Metal

Solid 18K white gold, available in yellow or rose on request

Stones

4 lab grown diamonds total: 2 asscher cut studs plus 2 emerald cut drops

Cut style

Step-cut family (asscher and emerald), matched as a pair

Drop dimensions

Approximately 11.3 mm long by 4.9 mm wide overall

Setting

Four-prong basket on both the stud and the drop, with a small articulated bail between

Closure

Push back as standard, with screw back available on request

Customization

Gold karat, gold color, stud carat, drop carat, stone type, back type

The pair sits in the vintage-inspired half of fine earrings, closer in spirit to deco and 1930s line earrings than to a modern hanging solitaire. Within the full earrings collection, this is the step-cut drop built for daily fine-jewelry wear rather than red-carpet length.

Two Step Cuts, One Articulated Column

The asscher cut at the top is the square cousin of the emerald cut: same parallel facets, same open table, square outline. Setting it directly above an emerald cut drop carries the step-cut language from stud to dangle without mixing brilliant-cut flash into the line. The result is the long, hall-of-mirrors light return that step cuts are known for, in a compact daily-wear length.

The drop is articulated by a small bail at the base of the stud, so the emerald cut stone swings independently and catches light as the wearer moves. Both stones are held in four-prong baskets with the prongs sized down to the corners so the outlines of the cuts stay visible. Push backs are standard for everyday wear; screw backs are available for higher carat configurations or for travel.

Solid 18K White Gold and Lab Grown Diamonds

The pair is cast in solid 18K white gold and rhodium-finished at the bench in our Shenzhen manufacturing facility. The four diamonds are lab grown, in standard commercial grades (F to G color, VS clarity by default, higher grades available on request) and arrive with a diamond test certificate. Step cuts are unforgiving on color and clarity because the open facets show inclusions clearly, so the matching pass at the bench is tighter than for brilliant cuts.

• ◆ Asscher and emerald cut stones matched across the pair for color, clarity, and ratio so both ears mirror each other
• ◆ Four-prong baskets cut and polished by hand, with prong tips sized to the cut corners
• ◆ Articulated bail between stud and drop tested for smooth swing and secure stop
• ◆ Final inspection covers prong security, push back travel, post straightness, and certificate match against each mounted stone

Adjustable to Your Carat Weights, Metal, and Back Type

This pair of drop earrings is built to order. The configuration shown is a starting point, not a fixed SKU. The following options can be specified before production starts.

• ◆ Stud (asscher) carat weight: 0.5 ct, 0.75 ct, or 1 ct per stud
• ◆ Drop (emerald) carat weight: 1 ct, 1.5 ct, 2 ct, or 3 ct per drop
• ◆ Gold karat: 14K or 18K, with 18K offering a brighter rhodium-finished white
• ◆ Gold color: white as shown, yellow, or rose
• ◆ Stone type: lab grown diamond as standard, with natural diamond available on request
• ◆ Diamond grade: F to G VS as standard, with D to F VVS available on request
• ◆ Back type: push back as standard, with screw back available

For fully custom designs beyond these options, start here →