Redora Jewels

Lab Grown Diamond Ear Jacket Earrings in 14K White Gold, Floral Basket

A stud from the front, and something else entirely from behind the ear.

Diamond ear jacket earrings in 14K white gold, a stud in front and a larger stone in a floral basket below, 2 3/4 ct across 64 lab grown diamonds.

14K White Gold
Lab Diamond
64 Stones / 2 3/4 ct
Floral Basket
15.70 mm Drop

Available in 14K or 18K gold, in white, yellow, or rose. Carat weight, basket style, and back type can be specified before production. Natural diamond available on request.

Typical production time: 7 to 15 days after design details are confirmed.
Shipped by FedEx, DHL, or UPS. Delivery usually takes 2 to 5 days, depending on destination and customs clearance.
Factory Direct
Test Certificate
Secure Shipping
The Piece

What Is an Ear Jacket?

These ear jacket earrings pair a prong set diamond stud in front with a larger round diamond that comes back around below the lobe, seated in a floral basket. 64 lab grown diamonds and 2 3/4 carats across the pair, 15.70 mm tall by 6.80 mm wide.

Product type
Diamond ear jacket earrings, sold as a pair
Metal
14K gold, shown in white, yellow, and rose
Front stone
One prong set round lab grown diamond per ear
Jacket stone
One larger round diamond per ear, held in a diamond set floral basket
Stones
64 lab grown diamonds across the pair
Total carat weight
2 3/4 ct across the pair
Dimensions
15.70 mm tall by 6.80 mm wide per earring
Closure
Push back post

The reason to own a jacket rather than a drop is that it is two earrings. Left alone, the front stud is a plain solitaire for a working day. With the jacket on, the same piercing carries 2 3/4 carats. Within our earrings range, this is the pair that changes register without changing what is in your ear.

Design Details

Where Does the Floral Basket Show?

The basket under the lower stone is pierced and set with small diamonds on its underside. From straight on you never see it. It shows when someone is standing beside or behind you, which is the angle a plain solitaire has nothing to offer. That is the whole argument for the detail: it is worked on the face of the earring that the wearer cannot see and everyone else can.

Each earring is two separate pieces. The stud goes through the lobe from the front, and the jacket slides onto the back of that same post and swings the larger stone around to sit just below. Nothing extra pierces the ear, and the stud can be worn on its own by leaving the jacket in the box. The lower stone sits slightly forward of the stud so the two read as a stacked pair rather than one overlapping the other.

Materials & Craft

What Metal and Diamonds Are Used?

The studs, the jackets, and the baskets are solid 14K gold, shown here in white, yellow, and rose. The 64 stones are lab grown diamonds totalling 2 3/4 carats: four principal rounds, one stud and one jacket stone per ear, with the rest set into the two baskets. The basket stones are melee, so the pair is covered by a test certificate on the gold and the diamonds rather than by a report on every stone.

  • ◆ The floral basket is pierced and then set from the underside, which is the face that shows from behind the ear and the one most baskets leave plain
  • ◆ The jacket is drilled to the same post gauge as the stud, so the two parts sit tight against the lobe instead of rattling on a loose fit
  • ◆ The jacket arm is bent so the lower stone sits forward of the stud rather than directly beneath it, which is what stops the two overlapping head on
  • ◆ All four principal stones are matched for size, colour, and cut across the pair before either basket is set
Made to Order

What Can Be Specified Before Production?

These ear jackets are built to order. The configuration shown is a starting point, not a fixed SKU. The following options can be specified before production starts.

  • ◆ Total carat weight: 2 3/4 ct across the pair as shown, with lighter versions built to the same proportions
  • ◆ Wear: as a full jacket pair, or the front studs on their own
  • ◆ Basket: the floral pattern as shown, or a plain undecorated basket
  • ◆ Gold karat: 14K as shown, or 18K
  • ◆ Gold color: white, yellow, and rose, all three shown
  • ◆ White gold finish: rhodium plated over solid white gold; the plating wears gradually with friction, fastest on rings, and can be re-plated
  • ◆ Closure: push back as shown, with a screw back for heavier carat weights
  • ◆ Stone type: lab grown diamond as standard, with natural diamond available on request
  • ◆ Diamond grade: F color and VS clarity at minimum, with Excellent cut on the round stones, as our lab grown standard; D color and VVS clarity available on request

For fully custom designs beyond these options, start here →

Next Step

To start an inquiry on these ear jackets, send us the total carat weight you want, preferred gold karat (14K or 18K) and color, whether you want the floral basket or a plain one, and which back type suits you, so we can scale the jacket to the stud size you choose.

Share Your Preferences

Made to order

This design is a starting point

Every piece is produced to order at our Shenzhen manufacturing facility, so the version you receive can differ from the one on this page.

Change the specifications

Metal and karat, stone type, carat weight, setting style, and finished dimensions.

Or send your own design

A sketch, a reference photo, or an AI generated image. Our team builds the CAD from it and tells you what has to change to make it wearable.

Free engraving

Included on every piece. Your own text and your choice of font, at no added cost.

Send your image, preferred metal, size, and any changes. You receive a CAD render to approve before production starts. Production takes 7 to 10 days for most pieces, up to 15 for complex designs, then 2 to 5 days in transit with FedEx, DHL, or UPS.

Send your design
Get Your Price on WhatsApp