Redora Jewels

Cultured Pearl Bangle Bracelet in 14K Yellow Gold

One oval cultured pearl interrupts a fine, continuous gold circle.

A solid 14K yellow gold closed bangle with a 12 x 13 mm cultured pearl, approximately 1 mm wire and a 2.5-inch reference diameter.

Solid 14K Yellow Gold
One Cultured Pearl
12 x 13 mm Cultured Pearl
Approx. 1 mm Wire
2.5-inch Diameter

Made to order in solid 14K or 18K gold. Specify the bangle diameter, gold color and cultured pearl size before production.

Typical production time: 7 to 10 days after design details are confirmed.
Shipped by FedEx, DHL, or UPS. Delivery usually takes 2 to 5 days, depending on destination and customs clearance.
Factory Direct
Made to Order
Secure Shipping
The Piece

What are the dimensions of this cultured pearl bangle?

This cultured pearl bangle places one 12 x 13 mm cultured pearl on a continuous circle of solid 14K yellow gold wire, approximately 1 mm thick. The reference bangle diameter is 2.5 inches, with a circumference of approximately 8 inches. The closed circle slips over the hand.

Product type
Closed round cultured pearl bangle
Metal
Solid 14K yellow gold
Stone
One oval cultured pearl
Cultured pearl size
Approximately 12 x 13 mm
Gold wire thickness
Approximately 1 mm
Reference diameter
2.5 inches (approximately 6.35 cm)
Reference circumference
Approximately 8 inches (20.3 cm)
Fit
Closed slip-on circle; size must pass over the hand

The continuous gold line gives the oval cultured pearl a simple frame with no pendant hanging below it. Among our gold bracelets, this is a slim rigid-circle design with one larger focal bead.

Design Details

How should a closed cultured pearl bangle be sized?

The cultured pearl sits on the gold circle itself, with the fine wire passing through its center. Its approximately 12 x 13 mm proportions contrast with the 1 mm gold wire, making the single bead the visible focal point.

A closed bangle must pass over the widest part of the hand, so wrist circumference alone is not enough to choose its size. Share the inner diameter of a comfortable slip-on bangle or your hand measurement. Do not pull the circle open or bend the wire to change its fit.

Materials & Craft

What matters where the gold wire meets the cultured pearl?

The key assembly detail is the transition between the approximately 1 mm gold wire and the drilled opening through the cultured pearl. The opening, wire alignment and circular profile need to work together without forcing the pearl against the metal. As with all our cultured pearl jewelry, Redora confirms the pearl variety and any color treatment with the selected materials before production.

  • ◆ Single-bead layout: one cultured pearl forms the focal point on the continuous gold circle.
  • ◆ Wire profile: retain a smooth, rounded circle and check the area where the wire enters the cultured pearl.
  • ◆ Handling: keep pressure off the thin wire and avoid squeezing or bending the bangle.
  • ◆ Care: remove before exercise, swimming or showering, and keep away from perfume and cleaning chemicals.
  • ◆ Cleaning: wipe gently with a soft cloth after wear; avoid ultrasonic and steam cleaning.
Made to Order

Which dimensions can be agreed before production?

This closed cultured pearl bangle is made to order. The reference dimensions establish the design proportions; the finished size is agreed for your hand clearance and preferred fit.

  • ◆ Bangle size: use the 2.5-inch diameter as the reference and confirm the required finished size before production.
  • ◆ Gold karat: solid 14K or 18K gold.
  • ◆ Gold color: yellow gold as shown, with white or rose gold available on request.
  • ◆ White gold finish: rhodium plated over solid white gold; the plating wears gradually with friction, fastest on rings, and can be re-plated
  • ◆ Gold wire: approximately 1 mm in the reference design; discuss another thickness if you prefer a different visual weight.
  • ◆ Cultured pearl selection: discuss the oval shape, approximately 12 x 13 mm size and tone; variety and any dye treatment are confirmed before production.

For fully custom designs beyond these options, start here →

Next Step

Send the inner diameter of a bangle that passes comfortably over your hand, your preferred cultured pearl size, and your choice of gold karat and color. Redora will confirm the finished proportions and materials before production.

Share Your Preferences

Made to order

This design is a starting point

Every piece is produced to order at our Shenzhen manufacturing facility, so the version you receive can differ from the one on this page.

Change the specifications

Metal and karat, stone type, carat weight, setting style, and finished dimensions.

Or send your own design

A sketch, a reference photo, or an AI generated image. Our team builds the CAD from it and tells you what has to change to make it wearable.

Free engraving

Included on every piece. Your own text and your choice of font, at no added cost.

Send your image, preferred metal, size, and any changes. You receive a CAD render to approve before production starts. Production takes 7 to 10 days for most pieces, up to 15 for complex designs, then 2 to 5 days in transit with FedEx, DHL, or UPS.

Send your design
Get Your Price on WhatsApp