Diamond Pave Hinged Cuff Bracelet in 18K Yellow Gold

All the Diamonds at the Edges, Nothing in the Middle, on Purpose

Most diamond cuffs scatter stones across the body of the bracelet. This one does the opposite: the entire arc is polished solid 18K yellow gold with no stones, and all 28 diamonds are compressed onto two octagonal end caps at the wrist opening. The body stays quiet, the diamonds stay concentrated. The visual logic is inverse to standard pave cuff design and reads as deliberate the moment the cuff hits the wrist. This diamond pave hinged cuff bracelet is built around the choice to keep the middle empty.

Product type

Hinged solid gold cuff with pave diamond end caps

Metal

Solid 18K yellow gold (Au750), silver-zinc alloy, no plating

Stones

28 round brilliant lab grown diamonds across two octagonal end caps (14 per cap)

End cap shape

Octagonal, eight sides chosen to seat a full pave cluster without crowding

Body finish

High-polish mirror, tapered from a wider center toward the end caps

Opening

Hinge at the inner wrist bottom, invisible from any standard viewing angle

Wear style

One-handed put-on and removal, sits as a closed oval on the wrist

Customization

Cuff sizing (wrist circumference), gold karat and color, diamond count, stone type

The cuff also opens with one hand, the hinge is positioned at the inner wrist bottom where it stays out of sight. Within our bracelets collection, this is the design for buyers who want diamond presence at the wrist without the visual noise of full-body pave.

Why the Body Tapers, Why the Caps Are Octagonal, Why the Hinge Hides Underneath

The cuff body is wider at the center than at the ends. The taper is structural: a uniform-width cuff would put visual weight at the middle of the arc, which is exactly where the bracelet does not want attention because the middle is empty. By narrowing toward the end caps, the taper pulls the eye toward the wrist opening where the diamonds are concentrated. The empty middle becomes a transition rather than a void.

The octagonal cap is not common in cuff design, and that is the point. A round cap matches a round cuff cross-section and reads as expected. An octagonal cap reads as architectural, the eight flat sides break the cuff’s curved geometry at the precise point where the design wants a visual stop. Eight sides also give the cap face enough perimeter to seat 14 round diamonds in a balanced pave layout without overlap or empty corners. The cap face sits parallel to the wrist surface so the pave faces outward, returning light to the viewer rather than into the hand or away from it.

The hinge is positioned at the inside bottom of the arc and engineered to maintain alignment after repeated opening. When closed and worn, the hinge is invisible from above, from the side, and from the front. The cuff reads as a closed bangle to anyone looking at it. Only the wearer knows it opens.

18K Yellow Gold and 28 Pave Diamonds Across Two Caps

The cuff body is cast in 18K solid gold (Au750), 75 percent pure gold by weight, in a silver-zinc alloy that produces the warm saturated tone characteristic of 18K yellow. The surface is hand-polished to a mirror finish after setting, with the empty body being the surface where polish quality is most visible (any tool marks or unevenness would show without diamonds to draw the eye away). The 28 stones are lab grown diamonds, IGI certified, pave-set across both end caps with shared micro-prongs. Stone placement is checked under magnification to confirm consistent surface level across each cluster, an uneven pave at this concentration would be immediately visible because there are no other diamonds elsewhere to distract from it. The hinge barrel is fabricated from the same gold alloy as the body and integrated flush into the arc form, tested for alignment and closure resistance before final polishing.

• ◆ 18K yellow gold (Au750) silver-zinc alloy, no plating, no filled base metal
• ◆ 28 round brilliant lab diamonds pave-set across two octagonal end caps (14 per cap)
• ◆ Surface level across each pave cluster checked under magnification for visible uniformity
• ◆ Hinge barrel fabricated from the same gold alloy, integrated flush, alignment-tested before polishing
• ◆ Body polished to mirror finish, the empty surface where polish quality matters most

Cuff Sizing, Gold Color, Cap Diamond Count, and Stone Type

This cuff is built to order. Cuff sizing is the decision that matters most, a hinged cuff that is even slightly oversized rotates on the wrist and shifts the diamond caps out of position.

• ◆ Cuff sizing: provide your wrist circumference in centimeters or inches and the production team will calculate the correct interior diameter (the cuff fits the wrist bone, not the widest knuckle)
• ◆ Gold karat: 14K or 18K, with 18K offering richer color saturation in the polished body where the gold tone carries the design
• ◆ Gold color: yellow as shown, white shifts the piece toward a cooler palette and changes how the diamond caps contrast against the body, rose introduces warmth different from yellow
• ◆ Diamond count and stone size: 28 round brilliants across both caps is standard, larger stones or a modified cap with fewer larger diamonds can be specified
• ◆ Cap shape: octagonal as standard, a hexagonal or rectangular cap is possible and changes the architectural read of the cuff
• ◆ Stone type: lab grown diamond as standard, with natural diamond available on request

For fully custom designs beyond these options, start here →