Three rows of light on a slim hinged band, made to sit beside a watch or a stack rather than compete with it.
Hinged diamond bangle in solid 14K white gold, three rows of round lab grown diamonds with a bezel set center row, 3 1/2 ct across 137 stones.
Available in 14K or 18K gold, in white, yellow, or rose. Wrist size, band width, and carat weight can be specified before production. Free custom engraving, your own wording and font. Natural diamond available on request.
This lab grown diamond bangle carries three rows of round lab grown diamonds across the top of a hinged band in solid 14K white gold: a center row of larger stones in faceted bezels, framed by two rows of pave. 137 stones, 3 1/2 carats, 6.9 mm wide and 3.2 mm high.
The stones run across the upper half of the band and the underside is plain gold with open cutouts, which is the half that rests on a desk or a keyboard. Among our gold bracelets, this is the bangle that pairs a bezel set center row with pave edges, so it carries more stone than a single row band without the bulk of full pave.
The middle row carries the larger stones, each in its own faceted bezel with small prong accents at the sides. A bezel wraps the girdle of the stone in a thin wall of gold, so the largest diamonds, which sit highest on the band and take most of the knocks, are the ones with a full metal collar around them. The outer wall of each bezel is faceted too, so the collar catches light instead of reading as a flat gold ring.
The two outer rows are smaller round stones set pave, each held by beads of gold raised over its edge. They frame the center row and soften the edge of the band, so the bangle reads as one field of light from straight on and as three distinct lines from the side. At 3.2 mm high it sits low enough to slide under a shirt cuff, and the hinge lets it open wide rather than being pushed over the hand.
The band, the bezels, and the hinge are solid 14K white gold with a rhodium finish. The 137 stones are round lab grown diamonds, 3 1/2 carats in total. Every stone is a pave or accent size rather than a graded center stone, so the bangle is covered by a test certificate on the gold and the diamonds rather than by a report on each stone.
This bangle is built to order. The configuration shown is a starting point, not a fixed SKU. The following options can be specified before production starts.
To start an inquiry on this bangle, send us your wrist measurement, the band width you want, the total carat weight, preferred gold karat (14K or 18K) and color, and any text you want engraved inside, so we can size the band and grade the three rows to your stones.
Made to order
Every piece is produced to order at our Shenzhen manufacturing facility, so the version you receive can differ from the one on this page.
Metal and karat, stone type, carat weight, setting style, and finished dimensions.
A sketch, a reference photo, or an AI generated image. Our team builds the CAD from it and tells you what has to change to make it wearable.
Included on every piece. Your own text and your choice of font, at no added cost.
Send your image, preferred metal, size, and any changes. You receive a CAD render to approve before production starts. Production takes 7 to 10 days for most pieces, up to 15 for complex designs, then 2 to 5 days in transit with FedEx, DHL, or UPS.
Send your design




