Redora Jewels

Oval Lab Grown Diamond Engagement Ring – 18K Yellow Gold with Oval Side Stones (3.08 ct Center)

An oval solitaire where the side stones are oval too, so the light path continues down the band instead of stopping at the center.

Solid 18K yellow gold engagement ring with a 3.08 ct oval lab grown diamond center and 12 graduated oval side stones, total 5.80 ct.

18K Yellow Gold
Lab Diamond
3.08 ct Oval Center
5.80 ct Total Weight
Oval Side Stones

Available in 14K or 18K gold across yellow, white, and rose tones. Ring size, center carat weight, and side stone configuration can be specified before production. Natural diamond available on request.

Typical production time: 7 to 12 business days after design details are confirmed.
Shipped by FedEx, DHL, or UPS. Delivery usually takes 2 to 5 days, depending on destination and customs clearance.

Factory Direct
IGI Certified
Secure Shipping

The Piece

An Oval Solitaire Lifted by Oval Side Stones

This is an oval lab grown diamond engagement ring built on one unusual decision: the side stones are oval-cut too, not the round melee that almost every other oval solitaire defaults to. A 3.08 ct elongated oval lab diamond sits at the center, held by four slim yellow-gold prongs, and on each shoulder six smaller oval lab diamonds run in a graduated line down the band, prong-set side by side so the brilliance carries continuously from the center stone outward instead of dropping off into smaller round sparkle.

Product type
Oval solitaire engagement ring with oval-cut side stones
Metal
Solid 18K yellow gold, Au750
Center stone
Oval lab grown diamond, approximately 3.08 ct, VS clarity, E color grade
Side stones
12 oval lab grown diamonds, approximately 2.72 ct total, graduated
Total carat weight
Approximately 5.80 ct
Band dimensions
4.5 mm wide, 1.8 mm thick
Total ring weight
Approximately 8.77 g
Customization
Gold karat, gold color, ring size, center carat, side stone configuration, and stone type

It suits a wearer who has been shown the standard oval-with-round-pavé combination and wants the side stones to share the same visual language as the center, rather than play a supporting role at a different cut. Within our engagement rings collection, this is the all-oval design built so the shoulder stones extend the center stone’s light return rather than frame it.

Design Details

All-Oval Light Path, Slim Prongs, Engraved Inner Band

The defining structural choice is the all-oval light path. Most oval solitaires use round melee on the shoulders because round stones are easier to source and seat in a uniform pavé line. Using oval side stones means each one is cut, oriented (length-wise along the band, all facing the same direction), and set individually so the line reads as a continuous oval sequence from the center stone outward. The visual effect is that the eye does not stop at the center stone, it travels along the band, which makes the 3.08 ct center read larger than its carat weight on the finger.

The center stone is held by four narrow yellow-gold prongs, claw-style, leaving the oval’s full length exposed on the long axis. Band width is 4.5 mm at the shoulders, tapering slightly toward a 1.8 mm-thick inner profile that sits flat against the finger. The inside of the band is engraved with the Redora signature in a sans-serif typeface, visible only when the ring is off the hand. Total ring weight is approximately 8.77 g, with the side stones contributing real diamond weight rather than visual filler.

Materials & Craft

Solid 18K Yellow Gold and IGI Certified Lab Diamonds

The ring is cast in solid 18K gold throughout, Au750, with no hollow core and no plating. The center stone and all 12 side stones are lab grown diamonds, VS clarity with E color grade, IGI certified at the diamond level with a grading report shipped with the piece. The yellow tone shown is the standard 18K yellow alloy, with white and rose available as alternative configurations. The piece is nickel-tested for sensitive skin.

  • Each side stone is individually oriented with its long axis aligned to the band before the seats are cut, so the row reads as one continuous oval sequence rather than 12 separate stones
  • The four center prongs are bench-tapered by hand so they sit flush against the oval crown without covering the stone’s long facets
  • Side stones are graduated and color-matched at the bench so the lower-girdle brilliance flows evenly from the 3.08 ct center down to the smallest end stone
  • Final inspection covers prong height, side-stone seat depth, oval orientation alignment, inner-band engraving clarity, and band roundness before shipping

Made to Order

Adjustable to Your Size, Karat, and Center Carat

This oval lab grown diamond engagement ring is built to order. The configuration shown is a starting point, not a fixed SKU. The following options can be specified before production starts.

  • Ring size: US 3 to US 13, including half sizes
  • Gold karat: 14K or 18K, with 18K offering richer yellow saturation
  • Gold color: yellow (shown), white, or rose
  • Center stone carat: 1.50 ct, 2.00 ct, 3.08 ct (shown), or up to 5.00 ct oval
  • Side stone configuration: oval graduated as shown, round pavé as a more traditional alternative, or plain band with no side stones
  • Stone type: lab grown diamond as standard, with natural diamond available on request


For fully custom designs beyond these options, start here →

Next Step

To start an inquiry on this oval engagement ring, send us your ring size, preferred gold karat (14K or 18K) and color, target center carat weight, side stone configuration (oval graduated or round pavé), and any wedding band you intend to pair with it so we can plan the profile for a flush stack.

Share Your Preferences

Get Your Price on WhatsApp