Jesus pendants made to order at our manufacturing facility: the face of Jesus, the full figure, crucifix crosses and medallions in solid 10k, 14k or 18k gold. Every design is offered in several sizes with the gold weight stated for each, in one gold color or two tone.
The face of Jesus pendant, often called a Jesus piece: the head under a crown of thorns, in front view or three quarter profile. Satin skin against bright cut hair and beard, with the crown in yellow gold or plated white.
A Jesus body pendant is the figure of Christ from a crucifix, worn without the cross. Polished and modeled in relief, it is made from under 40 mm for daily wear up to large statement sizes over 120 mm.
A gold crucifix pendant carries the figure of Jesus on the cross, in one gold color or with the figure set off in white or rose gold. Diamond cut edges on the cross catch light without any stones.
A crucifix medallion pendant sets the scene of the crucifixion inside a round gold disc with a faceted rim. A smooth back can be ordered instead of a patterned one, and it takes free engraving.
Showing all 4 results




Pendant length is measured from the top of the bail to the bottom of the piece. In 10k gold our current designs run from about 1.3 g at 38 mm to 13.6 g at 125 mm, and every product page states the weight for each size.
| Length | How it wears | Chain it suits | Good for |
|---|---|---|---|
| 25 to 35 mm | Sits close to the collarbone and stays under a shirt collar | A fine to medium chain, about 1.5 to 3 mm | Daily wear, a first Jesus pendant, a confirmation or baptism gift |
| 38 to 51 mm | Reads clearly over a T-shirt without dominating it | A medium rope, curb or Franco chain, about 3 to 4 mm | The most versatile size for everyday wear over clothing |
| 57 to 95 mm | A statement piece, visible across a room | A heavier chain, about 4 to 6 mm, so the pendant does not flip | Wearing it as the main piece, on its own |
| Over 100 mm | An oversized piece that covers much of the chest | A heavy chain, 6 mm and up, with a large bail opening | Stage, events and collectors of large pieces |
Chain widths are a guide to balance, not a rule. The bail opening is listed on each product page, and a chain can be quoted with the pendant in the same karat and color.
Each size of each design is listed with its gold weight. Where a pendant is built hollow or with an open back to keep a large piece light, the product page says so and gives the grams.
10k is 41.7% pure gold, 14k is 58.5% and 18k is 75%, and the karat is stamped on the bail. Every pendant is solid gold, not gold plated, not gold filled and not vermeil.
On two tone designs, the white areas are rhodium plated as a finish. Rhodium wears gradually with friction and can be re-plated, and we say so on every two tone product page.
Pendants are priced directly from our manufacturing facility in Shenzhen, with no wholesaler or retail margin between the production team and you.
Jesus piece is the common name for a gold pendant showing the face of Jesus, usually under a crown of thorns, worn on a gold chain. The name now covers the full figure and crucifix designs too. Sizes run from small pieces worn under a shirt to large statement pieces worn over it.
Yes. 10k gold is 41.7% pure gold alloyed with other metals, and it is the lowest karat that can be sold as gold in the United States. It is harder than 14k or 18k, so fine textures and bright cuts hold their edges well. 14k is 58.5% gold and 18k is 75%, with a deeper yellow, and every design here can be made in any of the three.
A deep relief in solid gold all the way through would make a large pendant heavy and expensive, so many designs are built with a hollowed or open back. The gold is the same karat throughout. Every product page states whether the piece is hollow or open backed and gives the gram weight for each size, and a closed back can be quoted where you want more weight.
The white areas, such as a crown of thorns or the figure on a cross, are rhodium plated as a finish, which gives the bright white color. Rhodium wears gradually with friction, fastest on raised edges, and can be re-plated. The gold underneath is solid gold, not gold plated.
Yes, as a custom order. A crown of thorns, a halo or the edge of a medallion can be set with lab grown diamonds or natural diamonds, and the stone layout is drawn in CAD and approved before production. The diamond count and grade are quoted separately from the gold.
Simple designs are usually completed within 5 days, most orders take around 7 to 10 days in production after design details are confirmed, and complex pieces can require up to 15 days. Shipping goes by FedEx, DHL or UPS and usually takes 2 to 5 days, depending on destination and customs clearance.
Send a reference image, or tell us the design, size, karat and gold color you want. Our production team will come back with the gold weight and a realistic production schedule before anything is made.