Radiant Cut Three Stone Engagement Ring with Trillion Sides in 14K White Gold
The three stones sit level across the finger, so the ring reads as one clean line rather than a center stone with attachments.
A radiant cut lab grown diamond center in a double four claw head, with two trillion sides at 5/8 ct on a 2.2 mm knife edge shank.
Lab Diamond
Trillion Sides / 5/8 ct
Double Four Claw Prong
2.2 mm Knife Edge
Available in 14K or 18K gold, in white, yellow, or rose. Center stone carat, ring size, and side stone weight can be specified before production. Natural diamond available on request.
What Is a Radiant Cut Three Stone Engagement Ring?
This is a radiant cut three stone engagement ring in solid 14K white gold. A radiant cut lab grown diamond center sits in a double four claw prong head, flanked by two trillion cut lab grown diamonds totaling 5/8 ct, carried on a 2.2 mm knife edge shank.
- Product type
- Radiant cut three stone engagement ring
- Metal
- Solid 14K white gold, head, basket, and shank
- Center stone
- Radiant cut lab grown diamond, carat specified at order
- Side stones
- 2 trillion cut lab grown diamonds, 5/8 ct total
- Band width
- 2.2 mm, knife edge shank
- Center setting
- Double four claw prong, heart shaped claws
- Basket
- Inverted V profile beneath the center stone
- Customization
- Center stone carat, ring size, gold karat, gold color, side stone weight, and stone type
It suits a buyer who wants the presence of a three stone ring without the width that usually comes with one, since the trillions add spread across the finger while the shank stays at 2.2 mm. Within our engagement rings collection, this is the design built around a center stone you choose rather than one fixed to the listing.
How Do the Knife Edge Shank and Inverted V Basket Change the Look?
The shank is not flat or half round. It rises to a single ridge that runs the length of the band, so instead of a broad face of metal there is one bright line of light down each side of the finger. The practical effect is that a 2.2 mm band reads narrower than it measures, which leaves more visual room for the center stone. From directly above, the metal almost disappears and the three stones carry the whole ring.
The side view is where the rest of the design lives. The basket under the center stone is cut away into an inverted V rather than closed off with a straight gallery rail, so the profile shows an open architectural line instead of a solid block. The four center claws are doubled and shaped into hearts where they fold over the crown, a detail only visible up close or from the side. The two trillions are seated low and tight against the center so all three tables sit level, which is what makes the ring read as one line across the finger rather than a solitaire with stones added beside it.
What Metal and Diamonds Are Used?
The ring is made in solid 14K white gold throughout, head, basket, and shank, with no filled or plated base metal core. Both the center and the two sides are lab grown diamonds. The center is a radiant cut specified per order rather than fixed to this listing, and it is IGI certified, with the report supplied alongside the finished ring. The two trillion cut sides total 5/8 ct and are matched at the bench to the color and clarity of the center stone rather than graded individually.
- ◆ The knife edge is filed and polished by hand into one continuous ridge after casting, since a cast edge on a 2.2 mm shank shows every waver in the line
- ◆ The inverted V is cut into the basket after the head is joined to the shank, which is what keeps the opening symmetrical when viewed from either side
- ◆ Each of the four center claws is split into its doubled heart form and closed over the crown of the radiant one at a time
- ◆ The trillion seats are cut to the table height of the chosen center stone, so the three tables finish level rather than stepped
What Can Be Specified Before Production?
This engagement ring is built to order. The configuration shown is a starting point, not a fixed SKU. The following options can be specified before production starts.
- ◆ Center stone carat and dimensions: the head and the trillion seats are cut around the stone you choose
- ◆ Ring size, including quarter and half sizes
- ◆ Gold karat: 14K or 18K, with 18K giving a denser alloy for the knife edge
- ◆ Gold color: white as shown, yellow or rose on request
- ◆ Side stone weight: 5/8 ct as shown, scaled up or down to balance a larger or smaller center
- ◆ Stone type: lab grown diamond as standard, with natural diamond available on request
To start an inquiry on this engagement ring, send us the center stone carat you have in mind, your ring size, preferred gold karat (14K or 18K) and color, and whether the trillion sides should stay at 5/8 ct or scale with the center, so we can cut the head and the seats to your exact stone rather than to a standard setting.
Made to order
This design is a starting point
Every piece is produced to order at our Shenzhen manufacturing facility, so the version you receive can differ from the one on this page.
Change the specifications
Metal and karat, stone type, carat weight, setting style, and finished dimensions.
Or send your own design
A sketch, a reference photo, or an AI generated image. Our team builds the CAD from it and tells you what has to change to make it wearable.
Free engraving
Included on every piece. Your own text and your choice of font, at no added cost.
Send your image, preferred metal, size, and any changes. You receive a CAD render to approve before production starts. Production runs 5 to 15 days depending on complexity, then 2 to 5 days in transit with FedEx, DHL, or UPS.
Send your design
